Tricks to prevent water from leaking out of the shower tray? A shower tray is a surface intended for water to flow through after it comes out of the faucet, and then must be drained. But how to prevent it from overflowing, from coming out of the shower tray. In this article, we will explain why this happens and what we can do. I invite you to join me.
Reasons why water comes out of the shower tray
Shower water can often leak out because the liter capacity of the drain is less than the amount of water it receives, and that’s where it overflows. Another very common reason is that the shower tray was badly installed, it is not centered and that makes the water come out.
And finally, it can happen that the siphon can is obstructed, and this is more common than we may think. The siphon can is the one that collects the water and prevents bad odors, sometimes the water carries body fats and industrial, such as gel or bath shampoos along with the hair that is installed in the siphon can and proceed to obstruct access and that causes the water to spill. In that case, what we must do is uncover it and clean it.
Also read: How to Unclog Pipes With Salt
What should we do to prevent the water from coming out of the shower tray?
What we can do after we have determined that the problem lies in the dish. It is to put a little height for that we are going to use a fiberglass bar and we will stick it with silicone, which after applying it will last approximately 24 hours to dry well.
It is good to have clear that the fiberglass sheet must be cleaned very well with alcohol. Place the glue and secure it with adhesive tape to obtain a better bond.
Translated and adapted by Noobuzz staff.